GAMRY INTERFACE 1010 POTENTIOSTAT/ GALVANOSTAT / ZRA
The Interface 1010 is a value oriented, general purpose potentiostat for almost all applications except for high current electrochemistry.
COLE-PARMER CG-200 FREEZER/MILL®
The Cole-Parmer CG-200 Freezer / Mill® cryogenic grinder (formerly SPEX 6775 Freezer/Mill) - for sample quantities from 0.1 to 5 g. The first choice for grinding very small quantities of temperature-sensitive samples or for samples that are impossible to grind at room temperature.
COLE-PARMER CG-400 FREEZER/MILL®
The Cole-Parmer CG-400 Freezer/Mill® Cryogenic Grinder (formerly SPEX 6785 Freezer/Mill) - the first choice for grinding sample quantities from 0.1 to 100g for temperature sensitive samples or samples that cannot be ground at room temperature.
COLE-PARMER CG-450 FREEZER/MILL®
The Cole-Parmer CG-450 Freezer/Mill® cryogenic grinder (formerly SPEX 6875 Freezer/Mill) – including the Auto-Fill – function. The first choice for grinding sample quantities between 0.1 and 100g in the case of temperature-sensitive samples or samples that are impossible to grind at room temperature.
SPEX SAMPLE PREP LABORMÜHLEN: 6870D FREEZER/MILL
The CG-500 Freezer/Mill® is a high-throughput, dual chamber, cryogenic grinder. It accommodates samples in the 0.1 to 200g range (100g per grinding chamber). Each grinding chamber can hold one large grinding vial or four standard grinding vials. Sample vial maintains cryogenic temperatures due to continuous immersion in liquid nitrogen.
GAMRY REFERENCE 620 POTENTIOSTAT / GALVANOSTAT / ZRA
The latest development in the Reference 600 series - the Reference 620 - features 20-bit analog/digital conversion, gaining about a decade of additional sensitivity. This makes the system the first choice for demanding applications, e.g. in basic research.
GAMRY REFERENCE 3000 POTENTIOSTAT / GALVANOSTAT / ZRA
The high-end potentiostat for all demanding applications in electrochemistry from very low to high currents.
GAMRY INTERFACE 1010 BIPOTENTIOSTAT
The Interface 1010 Bipotentiostat System from Gamry is compact, flexible, and inexpensive for all kinds of electrochemical measurements using two channels.
GAMRY MULTI-CHANNEL POTENTIOSTAT WITH INTERFACE POWER HUB (IPH)
Multi-channel systems are ideal for any application where significance can be increased by higher experimental throughput.
IMX8 (ELECTROCHEMICAL MULTIPLEXER)
The IMX8 (Electrochemical Multiplexer) offers higher experimental throughput by performing automatic sequential measurements. With some limitations compared to multi-channel systems is a cost effective alternative for many applications.
GAMRY EIS BOX 1010
The Gamry EIS Box 1010 consists of an Interface 1010 base unit and an electrochemical multiplexer optimized for impedance spectroscopy (EIS) on batteries, fuel cells and super capacitors up to ±12 V.
GAMRY SOFTWARE
Gamry has developed its own software for each important application in electrochemistry and offers a very simple and intuitive handling through open source scripting, flexible and uncomplicated, even the customized experiment as well as with other programming languages such as LabView, C++, etc.
GAMRY UV VIS NIR SPECTROELECTROCHEMISTRY
For synchronization of spectroscopic information with the electrochemical change of a redox pair Gamry offers the right system from UV to NIR
GAMRY RAMAN SPECTROELECTROCHEMISTRY
Synchronization of electrochemical changes of a redox reaction with complex scattered light spectroelectrochemistry or Raman spectroelectrochemistry
GAMRY FARADAY SHIELD
The successor to the Gamry VISTASHIELD continues to provide effective shielding from environmental electronic noise for demanding measurements at very low current levels and even with large measuring cells.
GAMRY - EURO CELL KIT
The Euro Cell Kit is the entry-level model for electrochemical corrosion measurements on cylindrical specimens
GAMRY FLEXCELL CRITICAL PITTING TEMPERATURE CELL KIT WITH TDC5
With Gamry´s FlexCell Cell Kit the critical pitting temperature is determined while avoiding the effects of crevice corrosion on flat specimens.
GAMRY MULTIPORT CORROSION CELL KIT
The design of the MultiPort Corrosion Cell Kit allows easy cleaning and a high degree of flexibility for electrochemical corrosion experiments on many sample geometries.
GAMRY PARACELL KIT FOR FLAT SPECIMEN
The ParaCell Kit for galvanic corrosion measurements and electrochemical noise measurements enables the investigation of many flat samples either against a graphite counter electrode or a second working electrode in symmetrical arrangement.
GAMRY PAINT TEST CELL (PTC1)
The Paint Test Cell Kit is the smallest and most cost-effective electrochemical measuring cell kit from Gamry.
GAMRY DYE SOLAR CELL TESTING KIT (IMPS / IMVS) WITHOUT BIPOTENTIOSTAT SYSTEM
This experimental setup of a synchronized bipotentiostat and an optical bench is used for the detailed characterization of dye solar cells
GAMRY REFERENCE ELECTRODES
The selection of the correct reference electrode determines the quality for electrochemical measurement results and their lifetime.
COLE-PARMER HG-200 GENOLYTE® COMPACT HOMOGENIZER
IInexpensive entry into fast and efficient homogenization and cell lysis allowing a variety of grinding vial types of 2ml, 5ml, 7ml and 12ml - up to six vials at the same time.
COLE-PARMER TEMPERATURE CONTROLLED HG-250 GENOLYTE® COMPACT HOMOGENIZER
Inexpensive entry into fast and efficient homogenization and cell lysis of temperature sensitive samples with a maximum of three 2ml vials at the same time.
AUTOMATED TISSUE HOMOGENIZER AND CELL LYSER COLE-PARMER HG-400 MINIG®
The entry into high-throughput cell disruption as well as fast and efficient sample homogenization with the Cole-Parmer HG-400 MiniG® (formerly 1600 MiniG®) - simultaneous homogenization of 192 samples in 2 x 96 deep well plates or up to 6 x 50 ml tubes
AUTOMATED TISSUE HOMOGENIZER AND CELL LYSER COLE-PARMER HG-600 GENO/GRINDER® 2010
High-throughput cell disruption as well as fast and efficient sample homogenization with the Cole-Parmer HG-600 Geno/Grinder® 2010 (formerly SPEX 2010 Geno/Grinder®) - simultaneous homogenization of 576 samples in 6 x 96 deep well plates or up to 16 x 50 ml tubes
SPEX SAMPLEPREP 2060 GENOSEAL
For quick and safe sealing of titer plates with the ANSI/SLAS standard format by heating the sealing film.
FUSION FLUXER KATANAX X-100
Device with one sample position in a compact format without compromising on robustness, purely electrical without gas or other media, for the production of melting tablets or acid solutions
KATANAX X-FLUXER® X-300
The Katanax Fluxer X-300 - preparation of glass disks (beads) for XRF or solutions for ICP with one, two or three sample positions, fully electric without gas or other media ... Fusion has never been so easier and safer.
KATANAX X-FLUXER® X-600
The Katanax X-Fluxer® X-600 – preparation of up to 6 glass disks for XRF or up to 6 solutions for ICP in parallel - fully electrically without gas or other media ... Fusion has never been so easier and safer.
KATANAX XFP-01 FLUXPENSER®
The automatic dosing machine Katanax XFP-01 FluxPenser® - precise and reproducible weighing of flux - including balance and LIMS compatibility.
COLE-PARMER XP-400 X-PRESS® AUTOMATIC LABORATORY PRESS
Pressing and pelletizing - reproducible - easy - fast ... the fully automatic and programmable XP-400 X-Press® (formerly SPEX 3636 X-Press) with a pressure range from 9.1 to 31.8 tons
SPEX 3626 MANUAL PRESS
Pressing pellets for IR-analysis - fast and economical ... the SPEX 3626 manually controlled laboratory press - an easy-to-use press with a pressure range of up to 10.9 tons for using the 13mm die set.
SPEX 3621 MANUAL PRESS
Pressing pellets for IR- and XRF-analysis - fast and economical ... the SPEX 3621 manually controlled laboratory press - an easy-to-use press with a pressure range of up to 10.9 tons for using various die set´s.
SPEX 3622 MANUAL PRESS
Pressing pellets for IR- and XRF-analysis - fast and economical ... the SPEX 3622 manually controlled laboratory press – the “allrounder” with a pressure range of up to 22.7 tons for using various die set´s.
